programming the CRV remotes

from hondasuv.com:
how to program the remotes:

Except where noted, time between steps should not exceed 4 seconds.
You may push either the lock or unlock button.
Use the same remote for steps 1-13.

Step 1: Turn ignition switch to ON (II)
Step 2: Push remote lock button
Step 3: Turn ignition switch off

Step 4: Turn ignition switch to ON (II)
Step 5: Push remote lock button
Step 6: Turn ignition switch off

Step 7: Turn ignition switch to ON (II)
Step 8: Push remote lock button
Step 9: Turn ignition switch off

Step 10: Turn ignition switch to ON (II)
Step 11: Push remote lock button
Step 12: Confirm that you hear the door locks move

Step 13: Within 8 seconds, press the 1st remote lock button
Step 14: Confirm that you hear the door locks move

Step 15: Within 8 seconds, press the 2nd remote lock button
Step 16: Confirm that you hear the door locks move

Step 17: Within 8 seconds, press the 3rd remote lock button
Step 18: Confirm that you hear the door locks move

Step 19: Turn ignition OFF, and remove key.
Step 20: Confirm that your keyless remotes now work.

Note: To program only one remote, skip steps 15-18.
To program only two remotes, skip steps 17 and 18.